.png)
03.06.2026
EASA STC for Cessna T210K, T210L with 4-blade MT-Propeller
MT-Propeller Entwicklung GmbH has received the EASA STC 10038720 R4 for the installation of the
4-blade scimitar composite propeller MTV-14-D/195-30b on the Cessna T210K and T210L in addition to the already certified P210N, P210R, T210M, T210N, T210R
powered by the Engines TCM TSIO-520-P, -R, -CE, -AF.
The addition of the T210K and T210L to the FAA STC SA00925WI is in progress.
MT-Propeller Vice President Martin Albrecht says, that the installation feature the following advantages:
The long-time proven MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD.
About MT-Propeller:
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements, they are also supplemental type certified on Part 25 aircraft.
No active AD, this is a safety record no other manufacturer has achieved so far.
The MT-Propeller fleet is approaching a total of 125 000+ propeller blades on 34 500+ propeller systems in operation and can look back on accumulated 200 million flight hours in over 45 years.
With the best damage tolerance and repairability, MT-Propeller has the lowest operational cost of any certified composite propeller manufacturer.
MT-Propeller is holding more than 230 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 55% of the US Aircraft Industry.
With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop, MT-Propeller has proven reliability for years.
A factory certified network of 62 service centers provides the best service and maintenance all over the world.
For questions regarding the press release please contact marketing@mt-propeller.com
4-blade scimitar composite propeller MTV-14-D/195-30b on the Cessna T210K and T210L in addition to the already certified P210N, P210R, T210M, T210N, T210R
powered by the Engines TCM TSIO-520-P, -R, -CE, -AF.
The addition of the T210K and T210L to the FAA STC SA00925WI is in progress.
MT-Propeller Vice President Martin Albrecht says, that the installation feature the following advantages:
- 5% better climb
- 3 to 5kts faster in cruise
- best vibration damping characteristics for almost vibration free propeller operation
- bonded on nickel alloy leading edges for superior erosion protection of the blades
- the scimatar blades have an unbeatable esthetic ramp appeal
- can be operated in Switzerland in the lowest noise category
- also certified without rpm restriction.
- Due to the smaller diameter, the MT-Propeller for the Cessna ()210() Series has more ground clearance for less blade tip erosion and FODs.
The long-time proven MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD.
About MT-Propeller:
MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.
The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels and hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners.
Fulfilling the highest certification requirements, they are also supplemental type certified on Part 25 aircraft.
No active AD, this is a safety record no other manufacturer has achieved so far.
The MT-Propeller fleet is approaching a total of 125 000+ propeller blades on 34 500+ propeller systems in operation and can look back on accumulated 200 million flight hours in over 45 years.
With the best damage tolerance and repairability, MT-Propeller has the lowest operational cost of any certified composite propeller manufacturer.
MT-Propeller is holding more than 230 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 55% of the US Aircraft Industry.
With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop, MT-Propeller has proven reliability for years.
A factory certified network of 62 service centers provides the best service and maintenance all over the world.
For questions regarding the press release please contact marketing@mt-propeller.com
