Service Documents | MT-Propeller

0

List of Service Bulletins

10.06.2026

List of Service Bulletins (0.60 MB)

1R12

TBO von Verstellpropellern MTV

TBO of variable pitch propellers MTV

10.06.2026

sb1.pdf (0.70 MB)

1-1R5

TBO for Hovercraft Applications

19.09.2025

sb1-1.pdf (0.24 MB)

2A

Fliehgewichte MTV-2-( )

Counterweights MTV-2-( )

02.02.1987

sb2.pdf (0.03 MB)

3

Steuergerät P-120-A (LTA # 89-108)

Control Unit P-120-A (Germany AD)

22.03.1989

sb3.pdf (0.02 MB)

4A

Ankerschrauben in MTV-1 und MTV-6-C (LTA # 90-214/2)

Lag Screws in MTV-1 and MTV-6-C (German AD)

08.04.1993

sb4.pdf (0.01 MB)

5

Ankerschrauben in MTV/MTE Propellern

Lag Screws in MTV/MTE propellers

24.01.1991

sb5.pdf (0.02 MB)

6

Notverfahren für elektr. Verstellpropeller (LTA # 92-367)

Emergency Procedures for electrically variable pitch propellers (German AD)

15.10.1992

sb6.pdf (0.02 MB)

7A

Stellmotoren - Austausch (LTA # 93-088/2)

Replacement of the electric pitch change motors (German AD)

06.10.1995

sb7.pdf (0.02 MB)

8B

Genauere Vorflugkontrolle für MT ( ) ( ) ( ) - ( ) und MTV-( ) (EASA AD No. 2006-0345)

More precise preflight inspection for MT ( ) ( ) ( ) - ( ) und MTV-( ) (EASA AD No. 2006-0345)

08.03.2006

sb8.pdf (0.17 MB)

9

Befestigung (Anzugsmomente) und Überprüfung der Installation für Holz-Composite Festpropeller

Inspection of installation and torque of mounting bolts for fixed pitch wood composite propellers

15.11.1994

sb9.pdf (0.01 MB)

10A

Installationsliste für Holz-Composite Festpropeller zugelassen in Frankreich

Installationlist for fixed pitch propellers certified in France

(Cancelled!)

10.06.2003

11F

Installationsliste für MT-Verstellpropeller zugelassen in Frankreich

Installation list for MT variable pitch propellers certified in France
(Cancelled!)

18.06.2003

12D

Propellernabe, Rißprüfung und Nachbearbeitung oder Ersatz der Nabe von MTV-3-B-C mit L250-21 Blättern an M-14-P/M-14-PF Motoren (LTA # 97-006/5)

Propellerhub, crack inspection and rework or replacement of the hub MTV-3-B-C with blades L250-21 at engines M-14-P/M-14-PF (German AD)

08.12.1998

sb12.pdf (0.07 MB)

13R6

Liste der möglichen Spinner an MT-Propellern

List of possible spinner assys for MT-propellers

08.04.2026

sb13.pdf (0.36 MB)

14R10

Liste der möglichen Regler für MT-Propeller

List of possible governors for MT-Propellers

09.05.2023

sb14.pdf (0.37 MB)

15R5

Mögliche Enteisungssysteme an MT-Propellern

Possible de-ice systems for MT-propellers

27.10.2021

sb15.pdf (0.09 MB)

16R1

Liste der Propeller-Installationen, für die ein Nachweis nach JAR-P-60(b), 160(b), 190 und 220 erbracht ist

List of MT-Propeller installations, which are in compliance with JAR-P-60(b), 160(b), 190 and 220

12.10.2021

sb16.pdf (0.23 MB)

17A

Propellerblätter, Prüfung des Anzugsmonents und gegebenenfalls Ersatz der Blattwurzel-Ankerschrauben bei MTV-3-B-C/L250-21, MTV-9-B-C/CL260-27 oder CL250-27 (LTA 1999-081/2, 1999-082/2)

Propeller blades, inspection of the torque and if applicable, replacement of the blade root lag screws of MTV-3-B-C/L250-21, MTV-9-B-C/CL260-27 or CL250-27 (German AD)

05.03.1999

sb17.pdf (0.02 MB)

18

MTV-25-1-D-C-R(M)/CR165-06 Austausch von Federn für Luftschiff Anwendung

MTV-25-1-D-C-R(M)/CR165-06 Replacement of springs for Airship Application

26.07.2000

sl18.pdf (0.08 MB)

19

Neue Steuergeräte P-120-A: Veränderte Bedienelemente und Bedienung

New electric control units P-120-A: Modified control elements and operational procedures.

28.02.2003

sb19.pdf (0.21 MB)

20

Inspektion der Ankerschrauben, die zur Produktion bis 1989 verwendet wurden

Inspection of lag screws, which were used for production until the year 1989

26.01.2004

sl20.pdf (0.07 MB)

21A

Nachziehen der Blattvorspannung Alle Halter / Betreiber von Flugzeugen MT-Verstellpropeller MTV-9-B-S installiert auf einem SMA SR 305-230 Motor

Retorque of blade preload nut All owners / operators of aircrafts using the variable pitch propeller MTV-9-B-S installed on engine SMA SR 305-230

22.08.2012

sb21.pdf (0.06 MB)

22

Compatibility of MT-Propeller Governors P-980-16 (28 VDC System) or P-980-11 (14 VDC System) according to MT-Propeller Service Bulletin 14 (latest issue)

13.03.2007

sb22.pdf (0.04 MB)

23R1

Mounting torque of 9/16 inches-18 UNF stop nuts

18.10.2021

sb23.pdf (0.09 MB)

24

PU Tape removal on CRLD193-109 and CRLD118-119a propeller blades

09.01.2008

sb24.pdf (0.07 MB)

25

MT-Propeller –B Flange installation Hardware Inspection on Lycoming Engines using SAE No. 2 mod ½” bolts and nuts of Part No. C-060 and C-061 and installed between Januar 2008 and July 2009 during manufacturing and/or Overhaul.

30.04.2010

sb25.pdf (0.10 MB)

26R5

De-Ice Wiring on MTV-27-1 Propeller series with Dual-Element De-Icing Boots (3 wires). Length of the Spinner Fixture Screws MTV-27-1 Propeller series equiooed with dual-elements boots.

23.11.2015

sb26.pdf (0.07 MB)

27

MT-Propeller Governors Inspection and Upgrade for Governor Models manufactured from May 2012 till Jan 2013 or Overhauled / Repaired with a new governor base from May 2012 till Jan 2013

20.02.2013

sb27.pdf (1.83 MB)

28

Installation of a Strake on TBM 700/850 series aircraft

10.06.2014

sb28.pdf (0.31 MB)

29R2

Splitted Retaining Ring Position Inspection which holds the blade in the Propeller hub. Affected propellers: MTV-33-1-A and MTV-34-1-A ,manufactured before June 2014

08.03.2017

sb29.pdf (0.39 MB)

30R9

Alert Service Bulletin:

Replacement of Blade Lag Screw of a certain production lot.

Affected propellers:

a) MTV-5-(), MTV-9-(), MTV-11-(), MTV-12-(), MTV-14-(), MTV-15-(), MTV-16-(), MTV-17-(), MTV-18-(), MTV-20-(), MTV-23-(), MTV-27-()
manufactured from Nov 2013 until October 2014 with Lag Screw type A-983-C-85 are affected.

b) All overhauled or repaired propellers from Nov 2013 until end of October 2014 with new installed lag screws during overhaul, as applicable.

15.01.2024

sb30.pdf (0.43 MB)

31

MT-Propeller Governors Inspection and Upgrade for Governor P-8XX-3 Models defined by Serial Number Manufactured from April 2010 until July 2013.

To all Owners/Operations of MT-Propeller Governor

Affected Types:
All Governors listed by type and serial number on page 3 and 4 which were manufactred from April 2010 until July 2013 installed on direct drive engines modified with electronic ignition or higher compression pistons.

29.08.2016

sb31.pdf (0.18 MB)

32

Replacement of Pitch Change Pins of Constant Speed Propellers

Affected Propellers:
All constant speed propellers 12 years or older with noticeable corrosion on steel parts, like counterweight bodies, counterweight modules or screws

30.05.2017

sb32.pdf (1.22 MB)

33

Replacement of the Blade Bearing A-1540 during Overhaul

Affected Propeller:
MTV-9-B-S / 198-58B installed on Cessna 182/ Socata TB20 with SMA SR305-230-01 Diesel engine

29.05.2018

sb33.pdf (0.10 MB)

34R1

Leading Edge Inspection

Affected Propeller:
MTV-33-1-A /( )-( ) - TCDS EASA-P.048 MTV-34-1-A /( )-( ) - TCDS EASA P.049 , which are manufactured between 1.September 2017 until 1.June 2018.

15.11.2020

sb34.pdf (0.12 MB)

35R2

Recommended RPMS for reduced long time wear in the blade bearing. Empfohlene Drehzahl für weniger Verschliess im Blattlager.

Affected Propeller: MT-Propeller model MTV-1-A/L160-03 which is operated in combination with a Limbach L2000( ) engine in airframes H36, RF5, G109 or TAIFUN 17E but not limited to those airframes and had an engine overhaul or exchange after January 2014.

Betroffene Propeller: MT-Propeller Modell MTV-1-A/L160-03, das in Kombination mit dem Limbach Motor L2000( ) unter anderem in den Flugzeugmodellen H36, RF5, G109 und TAIFUN 17E betrieben wird und eine Motorüberholung oder einen Motoraustausch nach Januar 2014 hatte.

12.08.2020

sb35.pdf (0.07 MB)

36R4

Engine Oils to be used for MT-Propellers

Affected Propeller:
All propellers using turboprop or reciprocating (also Diesel Jet A1) engines

05.05.2026

sb36.pdf (0.17 MB)

37R3

MT-Propeller Piston O-Ring replacement

Affected Propeller:
All Owners / Operators of MT-Propeller MTV-5-1-D-C-F-R(A)/( )-( ) which are installed on Allison / Rolls-Royce M250-B17( ) engine.

29.08.2024

sb37.pdf (0.19 MB)

38

MT-Propeller Hub Inspection

Affected Propellers:
All Owners / Operators of MT-Propeller MTV-27-1-E-C-F-R(G)/CFRL240-55d which are installed on Mitsubishi MU-2B-( ).

24.04.2023

sb38.pdf (0.96 MB)

39R1

Alert Service Bulletin: Replacement of the Propeller Guide Rod

Affected Propellers:
- All MTV-33-1-( ) / MTV-34-1-( ) / MTV-36-1-( ) propeller series which are manufactured before January 1,2024 and overhauled/repaired before June 6, 2025 and used as ground adjustable propeller systems, in operation without hydraulic governor.

18.06.2025

asb39.pdf (0.26 MB)

40

MT-Propeller green Piston O-Ring and Piston Backup Ring Replacement

Affected Propellers:
All Owners / Operators of MT propeller models MTV-5 / -16 / -27 / -37 / -47 installed on turbine engines from Pratt & Whitney, Honeywell, Rolls Royce and GE Aviation.

09.04.2024

sb40.pdf (0.06 MB)

41R1

MT-Propeller Turbo-Prop Piston O-Ring Replacement

Affected Propellers:
All Owners / Operators of MT propeller models MTV-5 / -16 / -27 / -37 / -47 installed on turbine engines from Pratt & Whitney, Honeywell, Rolls Royce and GE Aviation.

15.01.2026

sb41.pdf (0.15 MB)

0

List of Service Letter

13.07.2026

list_sle.pdf (0.32 MB)

1

Replacing of lag screws part No. A-550-85 and part No. A-550-65 by lag screws part No. A-983-85 and part No. A-983-65.

Affected Propellers: All Constant Speed Propellers.

12.05.1999

sl1.pdf (0.01 MB)

2

Aeroshell No. 5 is used instead of Aeroshell No. 6.

Affected Propellers: All Constant Speed Propellers.

Replaced by Service Letter No. 21

12.05.1999

3

Modification of the pitch change pin location.

Affected Propellers: All Constant Speed Propellers.

12.05.1999

sl3.pdf (0.01 MB)

4

Introduction of DF O-Rings.

Affected Propellers: All Constant Speed Propellers.

Replaced by Service Letter No. 14

12.05.1999

5

Replacing of screws part no. MS 35265-65/ A-1635-70 and washers part no. AN 960-10.

Affected Propellers: All Hydraulic Constant Speed Propellers.

12.05.1999

sl5.pdf (0.01 MB)

6A

Modification of Counterweights A-597-B.

Affected Propellers: MTV-9-B-C/CL250-27, MTV-9-B-C/CL260-27

12.05.1999

sl6.pdf (0.01 MB)

7A

Replacement of screws M3x10 by M3x12.

Affected Propellers: All Electric Constant Speed Propellers

05.03.2003

sl7.pdf (0.02 MB)

8

Obsolete

03.08.2026

9A

Replacing of blade bearings A-317, A-233, A-004

Affected Propellers: All variable pitch propellers

27.08.2001

sl9.pdf (0.01 MB)

10

Teardown inspection at 1/3 TBO.

Affected Propellers: All Variable Pitch Aerobatic Propellers.

01.03.2000

sl10.pdf (0.02 MB)

11

Installation of standard electric pitch change motor

Affected Propellers: All Electric Constant Speed Propellers.

05.04.2000

sl11.pdf (0.01 MB)

13

Painting of Counterweights

Affected Propellers: All Counterweighted Propellers

11.07.2002

sl13.pdf (0.01 MB)

14D

New blade seals in MT-Propeller constant speed propellers.

Affected Propellers: All MTV Constant Speed Propellers.

20.03.2003

sl14.pdf (0.01 MB)

15R1

New counterweights

Affected Propellers: All MT-Propellers with the new counterweights installed

30.04.2021

sl15.pdf (0.09 MB)

16

Erosion Sheath on fixed pitch propeller

Affected Propellers: All Fixed Pitch Propellers with a Diameter > 69.3 inch

01.02.2001

sl16.pdf (0.01 MB)

17C

Replacement of MTV-9/ -12/ -14/ -15 hub (serial numbers up to 97xxx).

Affected Propellers: MTV-9, MTV-12, MTV-14, MTV-15

09.03.2011

sl17.pdf (0.09 MB)

18R1

Additional Installation of PTFE back up ring

Affected Propellers: MTV-9-( ), MTV-12, MTV-14-( )

29.07.2015

sl18.pdf (0.08 MB)

19

New Control Unit P-120-A (beginning with serial no. WA01-XXX)

Affected Propellers: All aeroplanes and motor gliders with an electrical variable pitch MT-Propeller with a Control Unit P-120-A

21.10.2001

sl19.pdf (0.01 MB)

20A

Replacement of the front plate of MTV-9-/MTV-12-/MTV-14-/MTV-16-( ) with new hub

Affected Propellers: MTV-9/ -12/ -14/ -16, standard, with feather and reverse (M) (P).

19.02.2009

sl20.pdf (0.07 MB)

21B

Replacement of Aeroshell 5 by MT 2 Propeller Grease including improvement of viscosity

04.11.2002

sl21.pdf (0.01 MB)

22L

Obsolete

29.08.2024

23C

Grease Leakage Problem.

Affected Propellers: MTV-12-B/180-17 installed on Diamond DA40 with Lyc. IO-360-M1A.

21.03.2003

sl23.pdf (0.01 MB)

24A

Torque of Check Nuts and Slotted Nuts.

Affected Propellers: All hydraulic MTV-Propellers.

07.03.2003

sl24.pdf (0.02 MB)

25

Replacement of return spring, part no. A-085 by new return spring part no. D-389-K

Affected Propeller: MTV-6( )

28.01.2004

sl25.pdf (0.02 MB)

26A

Front Plates

Affected Propeller: All hydraulic MTV-Propeller (except dual acting Walter Reverse Systems -R(W)) manufatured between Augst 1999 up to October 2004 (serial no. 99xxx to 04xxx)

12.11.2004

sl26.pdf (0.07 MB)

27R1

Cure date and shelf live of MT-Propeller O-Rings

Affected Propeller: All hydraulic and electric constant speed MT-Propeller.

19.09.2012

sl27.pdf (0.15 MB)

28

Installation of oil cooler scoop P/N 763-8035-1/MT on Cessna U206 , TU206G (with Soloy Turbine PAC, FAA STC SA 3353 NM) equipped with 5-blade MTV-5-1-E-C-F-R(M)/CFR220-54 propeller

Affected Propeller: MTV-5-1-E-C-F-R(M)/CFR220-54

03.07.2006

sl28.pdf (0.03 MB)

29R6

Additional application of carbon fiber plies on blade tip area

Affected Propellers: MTV-15-B/210-58 and MTV-15-B/205-58 on Husky A1-( ) MTV-15-B/203-58 on ACA Scout MTV-15-C/200-50p / MTV-20-C/200-50p and MTV-15-( )/183-50 MTV-12-( )/( )180-57

27.09.2021

sl29.pdf (0.14 MB)

30D

Fluid De-Ice Boot Installation on MT-Propeller Composite Blades

18.06.2009

sl30.pdf (0.07 MB)

31A

MTV-9-B-S/198-58B Rework and Modification of Blade Preload-Nut A-1368 and Blade Ferrule A-1367

12.02.2008

sl31.pdf (0.07 MB)

32R6

MT-, MTE and MTV-Propellers with natural Composite Blades
In-Field-Repairs

08.03.2024

sl32.pdf (2.15 MB)

32-1

MT-, MTE and MTV-Propellers with natural Composite Blades
Painting

11.11.2013

sl32-1.pdf (0.93 MB)

32-2R1

Performance of Minor Infield Repairs of the Natural Composite MT-Propeller Blades During the Operation Time between Overhaul Periods

08.03.2024

sl32-2.pdf (0.24 MB)

33A

Shrouded Propeller Installation (if not enough clearance between blade tip and shroud)

20.01.2009

sl33.pdf (0.07 MB)

34

MTV-9-B-S/198-58B installed on Cessna 182 (SMA-Application) with Propeller hub A-926-2-( )

20.10.2009

sl34.pdf (0.11 MB)

34-1

MTV-6-( )-( )with Fluid Deice Systemn MTV-6-( )-( )-( ) propeller hub: A-900-I / A-1677

22.05.2017

sl34-1.pdf (0.14 MB)

35A

All MT-Constant Speed Propellers
Cleaning of Parts and Hubs by Glass / Plastic Media Blasting

13.03.2009

sl35.pdf (0.06 MB)

36

Rework of Hub Inserts to Newest Technical Standard during next Overhaul and/or Repair
MTV-16-1-N-C-F-R(P)
MTV-27-1-N-C-F-R(P)
MTV-27-2-N-C-F-R(P)

07.05.2009

sl36.pdf (0.09 MB)

37A

Propeller Governors for Electric Control P-857 / P-877 series
Correct Adjustment of Travel of Speed Change Nut

02.12.2011

sl37.pdf (0.11 MB)

38R2

Procedure for the Installation of the Preload System P-890

Affected Propeller: MTV-12, MTV-14, MTV-22

09.09.2014

sl38.pdf (0.06 MB)

39

Start Lock Springs
Exchange of Start Lock Springs, Identification of Springs
(for special customer only)

07.10.2009

40

Propeller Governors for Electric Control P-853, P-877 series
Installation of the Flexible Max Speed Stop Modification “D”
(for special customer only)

10.11.2009

41R1

Optional Replacement of Return Spring Part N. A-880 by new Return Spring Part No. A-1772 and A-1771-1

Affected Propeller: MTV-12-( )-C-F

23.06.2015

sl41.pdf (0.58 MB)

42

Propeller Designation System

21.03.2010

sl42.pdf (0.44 MB)

43

Cure Date and Shelf Life of MT-2 Propeller Grease

09.05.2011

sl43.pdf (0.08 MB)

44R1

Length of stainless-steel erosion protection sheaths for single blades

24.05.2020

sl44.pdf (0.03 MB)

45R2

(for MT-Propeller internal use only!)

14.12.2015

46

Fittings installed on Unfeathering Accumulator P-893-( )/P-905-( ) on all Diamond DA42 with Thielert/Austro/Lycoming engines

28.09.2012

sl46.pdf (0.04 MB)

47

Blade Seal Installation during Propeller Assembly

14.01.2013

sl47.pdf (0.05 MB)

48

i. p.

14.01.2013

49R9

Re-Positioning of de-ice cables to improve long time wear.

06.02.2018

sl49.pdf (0.49 MB)

50R2

Pitch change pin inspection during next overhaul or repair.

20.03.2023

sl50.pdf (0.29 MB)

51R1

Installation of Protective Erosion Tape on De-Ice Boots

Affected Propeller: MTV-27-1-E-C-F-R(G)/CFRL250-55b
Affected Aircraft: DO228 series

17.03.2016

sl51.pdf (0.40 MB)

51-1R4

Installation of Protective Erosion Tape on De-Ice Boots
Pilatus PC 12 / KingAir 90/200/300/350 series / Beech 1900 series SA-227-AT/-AC/-BC/-TT/-CC/-DC/ SA-226-TB / Metro 3 / Merlin 4

Affected Propeller:
MTV-27-1-E-C-F-R(P)/CFR210-58d
MTV-27-1-E-C-F-R(P)/CFR225-55f
MTV-27-1-E-C-F-R(G)/CFRL250-103
MTV-27-1-E-C-F-R(P)/CFR260-65b
MTV-27-1-(E)/(N)-C-F-R(P)/CFR260-65k
MTV-27-1-N-C-F-R(P)/CFR260-65a
MTV-47-1-N-C-F-R(P)-( )/CFR260-361

27.02.2024

sl51-1.pdf (0.06 MB)

52R1

Optimum Installation of the Christen 801 Series Inverted Oil System in
Combination with MT-Propellers.

Affected Propeller: MTV-12-B-C/C183-17e
Affected Aircraft: Grob G115E

For special customer only

29.05.2013

52-1R1

Installation of P-447 Accumulator in Combination with MT-Propellers

Affected Propeller: MTV-12-B-C/C183-17e
Installed per EASA STC 10043263

30.07.2015

sl52-1.pdf (0.26 MB)

52-2

Removal of Inner Propeller Spring on Counterweighted MT-Propeller

Affected Propeller: MTV-12-B-C/C183-17e
Installed per EASA STC 10043263

07.11.2013

sl52-2.pdf (1.35 MB)

53R4

Modification of Fluid Deice System

Affected Propeller:MTV-14-D/195-30b
Affected Aircraft: Cirrus SR22-( ) with Spinner Assy P-320-2

28.12.2015

sl53.pdf (0.34 MB)

54

Replacement of parts during overhaul or repair

Affected Propeller: MTV-27-1-N-C-F-R(G)-J with blade type CFR285-82 or CFRL 285-82
Affected Aircraft: Jetstream 41

25.07.2013

sl54.pdf (0.03 MB)

55R5

Installation of Protective Polyurethane Tape on MTV-5-()/-27-() Hovercraft blades

Affected Propeller:
MTV-5-1-W-C-R(H)/CRLD199-117
MTV-27-1-X-C-R(H)/CRLD218-121d
MTV-27-1-V-C-R(H)/CRLD258-121b
MTV-27-1-YZ-C-R(H)-J/CRRD350-132a
MTV-28-2-AZ-R(H)/CRRD358-160

Affected Vehicle: Griffon Hovercraft

(This service Letter overwrites 55A)

13.11.2015

56R2

General Information for MT-Propeller trained Mechanics Possible Action against Dynamic Vibration on MT-Propeller

Affected Propeller: MTV-27-( ), MTV-25-( ), MTV-16-( ), MTV-5-( )

06.11.2025

sl56.pdf (0.29 MB)

57R1

Affected Propeller: MTV-27-1-N-C-F-R(G)-J/ CFR285-82 / CFRL285-82
with spinner assembly P-1152-( )
installed on Jetstream 41
Manufactured / overhauled or repaired before 12/2013.

17.03.2015

sl57.pdf (0.14 MB)

58

Removal of inner propeller spring on counterweighted MT-Propeller

Affected Propeller: MTV-14-B-C/C190-17 on EXTRA 300 series, Cap 231/EX/232 Series

07.08.2014

sl58.pdf (0.17 MB)

59

Counterweight body crack inspection (Magnetic Particle Inspection)

Affected propeller: All counterweighted variable Pitch MT-Propeller

19.02.2015

sl59.pdf (0.55 MB)

60

Moficiation of Counterweight Body A-1496-(C )Y( )

Affected Propeller:
MTV-16-1-N-C-F-R(P)/ CFRLD265-65
MTV-16-1-N-C-F-R(P)/ CFRLD280-65

11.06.2015

sl60.pdf (0.05 MB)

61

Additional Secure of Motor Screws on Electric Motor P-820-( )

04.08.2015

sl61.pdf (0.48 MB)

62R1

Modification of the Starter Gear installed on Lycoming Engine for Electrically Controlled Variable Pitch Propeller Systems

Affected Propellers: MTV-7-( ),MTV-10-( ), MTV-18-( ), MTV-23-( )

13.09.2021

sl62.pdf (0.30 MB)

63

Inspection of Beta Valve P-846 / Prop Front O-Ring for possible Oil Leak Installed on RR250 engines

Affected Propellers:
MTV-5-1-D-C-F-R(A)/CFR210-56

02.11.2016

sl63.pdf (0.14 MB)

64

Alternative Positioning of MT-Propeller Identification Label

Affected Propellers:
All MTV-Propeller which have no identification label on the propeller blade

02.02.2017

sl64.pdf (0.13 MB)

65R1

Inner bearing Halves Inspection (Visual Inspection)

Affected Propellers:
All Hydraulically and Electrically Controlled Variable Pitch MT-Propeller As sharp edges were found on the split line of the inner bearing halves.

(For certified service stations only)

15.03.2021

66R1

Outer Blade Bearings MTV-33, MTV-34, MTV-36

20.03.2023

sl66.pdf (0.28 MB)

67

How to use the Anti Icing Liquid ICEX II (Goodrich) on MT-Propeller Blades

26.09.2017

sl67.pdf (0.25 MB)

68

Replacement of Electric Servo Motor Type 34L / 34LT / 35 NT
Installed on Electrically Controlled Variable Pitch MT - Propellers

24.08.2017

sl68.pdf (0.30 MB)

69

Readjustment of the Low Pitch Stop Rods or Replacement of the Piston Extension P/N A-1020-A-42-L installed on MTV-9-( )-( )-R(M) propeller during the next Repair or Overhaul

15.02.2018

sl69.pdf (0.22 MB)

70

Propeller Snap Ring Inspection MTV-33-( ) and MTV-34-( ) Propeller

10.09.2018

sl70.pdf (0.80 MB)

71R3

Governor jam relieve, adjustment of MIN and MAX RPM settings P-853-16 and -877-16

01.07.2020

sl71.pdf (0.27 MB)

72R3

Application of Expoxy Filler on Natural Composite Blades

06.03.2024

sl72.pdf (0.34 MB)

73R1

Optional installation of the blade bearing A-1540

20.03.2023

sl73.pdf (0.17 MB)

74

Propeller Carbon Blocks C-131-3 used for MT-Propellers installed on PT6A-( ) engines

25.02.2021

sl74.pdf (0.19 MB)

75R1

Piston exchange for MTV-47-( ) series

13.07.2026

sl75.pdf (0.25 MB)

76

Thicker Erosion Protection Sheaths on Fixed Pitch Propellers

18.08.2021

sl76.pdf (0.16 MB)

77

Length of the spinner fixture screws installed on spinner assembly P/N P-1741-( )

17.03.2022

sl77.pdf (0.10 MB)

78

PT-6 Governor Reverse RPM-Limitation Check (Py Air-Bleed Function)

Affected Propeller: MTV-16-1-E-C-F-R(P)/CFR240-55( ) on PT6-( ) engines

02.05.2022

sl78.pdf (0.46 MB)

79R1

New PTFE Backup Rings

Affected Propeller: All MT propellers MTV-( )-R(G), -R(P), -R(A), -R(W) -R(GE), installed on Garrett / Pratt & Whitney / Allison / Walter / GE engine applications

10.04.2024

sl79.pdf (0.35 MB)

80

MT-Propeller New Piston O-ring for Turboprop Installations

Affected Propeller: All MT propellers MTV-( )-R(G), -R(P), -R(A), -R(W) -R(GE), installed on Garrett / Pratt & Whitney / Allison / Walter / GE engine applications

OBSOLETE (replaced by Service Bulletin No. 40)

01.01.0001

81

Possible Grease Leak and High Friction of Blade Preload after or during Assembly Affected O-rings:

All blade O-rings, C-057-( )-R, all models of a certain production batch.

14.11.2022

sl81.pdf (0.13 MB)

82

Instructions for grounding of non-insulated electrically controlled governor Governor

Models affected: P-853-16, P-877-16.

29.04.2024

sl82.pdf (0.36 MB)

83R1

Alternative approved paint for paint corrections on propeller blades and domes

Affected Propeller: All MT propeller models used on Cirrus aircrafts.

30.10.2025

sl83.pdf (0.16 MB)

84

Nickel leading edges for improved erosion behavior compared to the stainless steel edge on blade type CFRLD280-65

Affected Propeller: All MT propeller models with blade model CFRLD280-65

07.05.2026

sl84.pdf (0.20 MB)

0

List of Service Instructions

22.05.2026

3

Instruction for low-pitch-stop, high-pitch-stop and full-reverse-stop adjustment on MTV-Propellers (former AAW-003a)

14.03.2000

4R15

Basic Data for Electro-Thermal De-Icer Installation on MT-PropellersBasic Data for Electro-Thermal De-Icer Installation on MT-Propellers

16.12.2025

6

Removal and Installation of Servo Motors at electrically controlled MTV-Propellers (former AAW-006)

14.03.2000

7

Installation of Clamp Type Counterweights at MTV-Propellers

14.03.2000

16

Installation of new counterweights

17.10.2000

17A

Change of minimum blade pitch on counterweighted MTV-Propellers

16.01.2006

18C

Airpressure Switch Adjustment for Propellers with Reverse Thrust Capability

12.10.2005

20 - 20-1

Drehzahlsensor und deren Tauschverfahren RPM Sensors and the Replacement Procedures

31.07.2002

22

Removal and Installation of the Stainless Steel Seal inserts in modified MTV-hubs

17.12.2001

23A

Installation of New Type of Blade Seals in Constant Speed MTV-Propellers

29.01.2004

24

Removal of Front Cover for Maintenance or Modification Purposes

21.06.2002

25B

Replacement of Servo Motors by "MT P820-()" Servo Motors

01.02.2005

27

Modification of the "Sleeve Valve Spring" installed in P-480-( ) Propeller Governors

17.07.2002

28A

Setting Maximum Blade Pitch on MT-Propellers (which use oil pressure to increase pitch)

16.01.2006

29 - 29-1

Änderung der Gewindebuchsen an einem SAE No. 2 Flansch
Bushing threads conversion on SAE No. 2 Flange type

16.01.2004

30

Adjustment of Relief Valve Pressure on P-41()-(), P-42()-() and P-44()-() Governors

26.06.2003

31

Application of Blade Bearing Grease to a MTV-25-2-D-C-R(M)/CFR170-23 *

03.11.2003

33

Entfernen des Safety Lock bei MTV-6-A-C-F für DA42

27.04.2004

34

Piston Extension Replacement MTV-6

05.07.2004

35

Piston Extension Replacement MTV-6

13.08.2004

36

Replacement of 3 counterweights on new MT-Prop

26.10.2004

37A

Bonding of self adhesive PU-Erosion strip on MT-Propellers with Metal Erosion Sheet
(replaces E-482 of April 14, 1994 of same contents)

05.04.2005

39

Blade installation for in-field removable MT-Propeller aluminum blades MTV-27-2

26.08.2005

40A

Oil capacity reduction plugs in the propeller hub of the propeller model MTV-9-B-S/198-58B with the engine SMA SR-305-230

23.03.2009

41R1

Flange Studs Replacement on MTV-Propeller with D-flange (ARP 502)

11.11.2013

41-1

Flange Studs Replacement on MTV-5-1-() –R(H) / MTV-27-1-( )-R(H)

04.12.2013

41-2

Flange Studs Replacement on MTV-Propellers with –A type flange

04.07.2018

44

Flange Stud Replacement on MT-Propeller with A-type flange

13.04.2007

45A

Governor Lever Exchange MTP Governors P-8()()-() and P-9()()-() series

25.06.2007

46

Work Instruction for the In-Field Final Assembly of MTV-16-1-N-C-F-R(P)/CFRLD280-65 Propeller

02.10.2007

47

Opening of Propeller Front Cover of MT-Propellers without Counterweights and without Feathering and Reversing Capability

17.10.2007

48C

Conversion from A- to R- Flange *

12.07.2010

49R1

Removal and Installation of Repair Bushing A-1251-X on hydraulic feathering propellers

17.12.2013

50

Removal and Installation of preload ring A-027-C on MTV-6-A

20.10.2008

51A

Removal and Installation of preload ring A-027-C on MTV-6-A

22.01.2009

53

Turning Connection Plug of Electric MT-Propeller Governor P-8( )3-( ) and P-8( )7-( )

07.04.2009

54R2

Propeller Governors for electricf Control P-8( )7 Series Adjustment of maximum Governing Speed Stop

23.05.2025

59R4

Removal and Installation of Deice Slip Ring at MTV-27-1-()/()()-()

21.11.2019

59-1R2

Installation of Synchrophaser Target Ring on MTV-27-1-( )/( )( )-( Without Deice System for Dornier 228 series

13.01.2022

60R4

Installation of Synchrophaser Target Ring on MTV-27-1-( )/( )( )-( Without Deice System for Dornier 228 series

24.05.2019

61-1

Cylinder Surface cleaning procedure after metal chip detection

30.03.2022

62

Setting the Pitot Switch

19.10.2014

63R1

MTV-1-( )Conversion to Dual Electrical Pitch Stop Type P-508-2

05.03.2015

64R4

Work Instruction for Final Assembly of the MTV-27-1-N-C-F-R(P)-J/CFR300-82a propeller series

17.10.2021

64-1R1

Work Instruction for Final Assembly of the MTV-27-1-E-C-F-R(P)/CFR260-65b propeller series

08.01.2018

64-2

Work Instruction for Final Assembly oft he MTV-27-1-N-C-F-R(G)-J/CFRRD285-82a Propeller Series *
Special Customer only

25.10.2016

64-3R1

Work Instruction for Final Assembly of the MTE-97( )-1-D/280-303 Propeller Series *

16.03.2017

64-4

Work Instruction for Final Assembly of MTV-14-B-C/( ) Propeller Series

21.06.2019

64-5R4

Work Instruction for Final Assembly and Disassembly of MTV-16-1-E-C-F-R(P)/CFR240-55a Propeller

09.07.2021

64-6R4

Work Instruction for Final Assembly of the MTV-27-1-E-C-F-R(G)/CFRL250-103 Propeller Series

06.03.2023

64-7R1

Work Instruction for final assembly of the MTV-27-1-E-C-F-R(P)/CFR225-55f Propeller Series for BEECHCRAFT KING AIR 200 W/ P&W PT6A-41/42/52/61

17.02.2020

64-8R1

Work Instruction for Final Assembly and Disassembly of the MTV-27-1-N-C-F-R(P)/CFR260-65b Propeller Series

31.08.2022

64-9

Work Instruction for Final Assembly and Disassembly of the MTV-47-1-(*)-C-F-R(*)/(*) Propeller Series

29.08.2024

66

Additional Carbon Layer for the Transition Section of the Single Layers Zusätzliches Karbongewebe im Übergangsbereich der einzelnen Lagen

26.11.2015

67

A-2001 Counterweight Modification Instruction

01.03.2016

68R16

Paint Process Sherwin Williams Products
Available in English and German Language!

19.01.2026

69

Inspection for possible corrosion on the propeller and engine/bearing flange and flange bolts due to penetration of salt water.

09.11.2016

70R1

Static Blade Balance Systemfor in-field on wing, single blade replacment

08.02.2018

71

Shape and Thickness of the MT-Propeller Blade Trailing Edge

03.04.2017

73R2

MTV-27-1-( )-R(H)-J/CRLD350-132b Propeller on Hovercraft 12000TD Daily Blade Inspection

18.12.2017

74

Adjustment of the maximum rpm on the Governor

04.04.2018

75R2

Paint Flaking on MT-Propeller Blades equipped with Nickel Leading Edges

20.09.2022

76

Guidelines for the Extension of Expiry Dates of Sherwin Williams Products According to the manufacturer Available in English and German language!

26.03.2018

76-1

Guidelines for the extension of expiry dates of Hexion Isamet R6/10 and Hardener 47/10 (German and English)

obsolete

03.08.2026

76-2

Guidelines for the extension of expiry dates of EPIKOTE Resin T-30W and Hardener SF-10 (German and English)

02.07.2024

76-3

Guidelines for the extension of expiry dates of EPIKOTE MGS BPR Resin A20 and MGS BPH Hardener B20 (German/English)

06.05.2026

76-4

Guidelines for the extension of expiry dates of resoltech 3350 ECO (White) Resin and resoltech 3358T (black) hardener or EPIKOTE MGSBPR135G3 Resin Westlake and EPIKOTE MGSBPR1355G Hardener Westlake (German and English)

06.05.2026

77R2

MTV-27-1-YZ-C-R(H)-J Propeller: Inspection of blade bearing preload and hub regreasing

20.08.2024

78R1

Repair of Damaged Epoxy Bond Filler between Slip Rings

19.06.2019

81R3

Re-Painting of Blades with Flaking Paint

11.12.2023

83

Blade Track Correction Procedure

10.10.2019

84

Work Instruction for Piston Extension Replacement MTV-16-1-E-C-F-R(P)/CFR240-55 *

25.03.2020

85

Application two (2) Carbon Fiber Plies under the Steel Erosion Protection Sheath on Fixed Pitch Propeller MT 175 R 150-2Ca

29.05.2020

86R1

Work Instruction for Removal and Installation of Repair Bushing A-1251-( )

02.09.2023

88R1

Spinner dome modification for spinner P-792-( ) installed on Diamond DA42 series

19.05.2025

89

Replacement of the Guide Rod on MTV-33-1( ) and NTV-34-1-( ) Propeller Series

22.09.2023

91R1

Propeller Self-test Failure Indication

10.06.2025

92

Electrical Bonding of Spinner Backplate / Spinner Assembly to the propeller hub

21.05.2026

0

List of Overhaul Manuals

22.05.2026

list_man.pdf (0.26 MB)

E-9000 R10

List of Consumables

15.04.2026

E-220 R72

ATA 61-12-20

Hydraulically Controlled Variable Pitch Propellers (Constant Speed)
MTV - 5 - ( )
MTV - 6 - ( )
MTV - 9 - ( )
MTV - 11 - ( )
MTV - 12 - ( )
MTV - 14 - ( )
MTV - 15 - ( )
MTV - 16 - ( )
MTV - 21 - ( )
MTV - 22 - ( )
MTV - 25 - ( )
MTV - 27 - ( )
MTV - 33 - ( )
MTV - 34 - ( )
MTV - 36 - ( )
MTV - 37 - ( )
MTV - 47 - ( )

19.03.2026

E-250 R39

ATA 61-12-50

Electrically Controlled Variable Pitch Propellers (Constant Speed, Feathering and Reverse)
MTV - 1 - ( )
MTV - 7 - ( )
MTV - 10 - ( )
MTV - 17 - ( )
MTV - 18 - ( )
MTV - 20 - ( )
MTV - 23 - ( )

30.10.2025

E-310 R8

ATA 61-13-10

Mechanische Verstellpropeller
MTV - 24 - ( )

21.01.2003

E-373 R14

ATA 61-13-73

Hydraulically Controlled Variable Pitch Propellers (Constant Speed)
MTV - 2 - ( )
MTV - 3 - ( )

03.07.2008

E-497 R5

ATA 61-14-97

MT-Wood Composite Fixed Pitch Propellers

07.11.2025

E-519 R43

ATA 61-15-19

Hydraulically Controlled Variable Pitch Propellers (Constant Speed) with Reverse Thrust Capability (Dual Piston-System)
MTV - 5 - ( ) - R (M)
MTV - 6 - ( ) - R (M)
MTV - 9 - ( ) - R (M)
MTV - 12 - ( ) - R (M)
MTV - 14 - ( ) - R (M)
MTV - 15 - ( ) - R (M)
MTV - 16 - ( ) - R (M)
MTV - 21 - ( ) - R (M)
MTV - 25 - 2 - ( ) - R (M)
MTV - 27 - ( ) - R (M)
MTV - 37 - ( ) - R (M)
MTV - 47 - ( ) - R (M)

30.10.2025

E-520 R29

ATA 61-15-20

Reversible Hydraulically Controlled Variable Pitch Propellers (Constant Speed) (Spring System) MTV - 25 - 1 - ( ) - R (M)

12.02.2015

E-526 R5

ATA 61-15-26

Hydraulic Propeller Governor (Regler) P - 480 - ( ) series

27.05.2005

E-571 R15

ATA 61-15-71

Hydraulically Controlled Variable Pitch Propeller MTV - 8 - ( )

27.02.2015

E-680 R57

ATA 61-16-80

Reversible Hydr. Controlled Variable Pitch Propeller (Constant Speed Prop.)
MTV-5-( )-R(A), (P)
MTV-9-( )-R(A), (DA),(P), (W)
MTV-14-( )-R(A)
MTV-16-( )-R(A), (G), (P), (W)
MTV-25-( )-R(A)
MTV-27-( )-R(G), (P), (W), (GE)
MTV-27-( )-R(G)-J
MTV-27-( )-R(P)-J
MTV-37-( )-R(P), (G)
MTV-47-( )-R(P), (G)
MTV-47-( )-R(P)-V

22.01.2026

E-700 R12

ATA 61-27-00

Hydraulic Accumulator
P - 447 - ()
P - 726 - ()
P - 832 - ()
P - 893 - ()
P - 905 - ()
P - 952 - ()
P - 1379 - ()

30.10.2025

E-808 R17

ATA 61-18-08

Standard Practices Manual

22.01.2015

E-808 R3

ATA 61-18-09

Overhaul Manual Metal Blades

28.05.2015

E-951

ATA 61-29-51

Hydraulic Propeller Governor (Regler)
P - 41( ) - ( )
P - 42( ) - ( )
P - 43( ) - ( )
P - 44( ) - ( )

01.08.2003

E-1047 R20

ATA 61-20-47

Hydraulic Propeller Governor (Regler)
P - 9 ( ) ( ) - ( ) series

21.01.2026

E-1049 R34

ATA 61-20-49

Hydraulic Propeller Governor (Regler)
P - 8 ( ) ( ) - ( ) series

20.01.2026

E-1290 R49

ATA 61-12-90

Overhaul Manual Composite Blades

19.01.2026

E-1985 R5

ATA 61-19-85

5400-Serien Einstellpropeller mit Metallblättern
5400-series Ground Adjustable Propeller with Metal Blades

20.12.2013

E-2286 R8

ATA 61-12-86

Ground Adjustable or Hydraulically controlled Variable Pitch Propeller
MTV-33-( )
MTV-34-( )
MTV-36-( )

15.05.2024

E-2392 R4

ATA 61-12-392

Reversible Hydraulically Controlled variable Pitch Propeller (Hovercraft / Airship)
MTV-5-( )-R(H)
MTV-6-( )-R(H)
MTV-16-( )-R(H)
MTV-22-( )-R(H)
MTV-25-( )-R(H)
MTV-27-( )-R)H)
MTV-27-( )-R)H)-J

30.10.2025

E-2492 R3

ATA 61-12-492

Allison Beta System P-846

15.12.2016

0

List of Operation and Installation Manuals

22.05.2026

list_man.pdf (0.26 MB)

E-112 R26

ATA 61-01-12

MT-Holz-Composite Festpropeller
MT-Wood-Composite Fixed Pitch Propellers

26.02.2019

e-112.pdf (0.40 MB)

E-118 R49

ATA 61-01-18

Elektrische Verstellpropeller
Electrically Controlled Variable Pitch Propellers (Constant Speed, Feathering and Reverse)
MTV - 1 - ( )
MTV - 7 - ( )
MTV - 10 - ( )
MTV - 17 - ( )
MTV - 18 - ( )
MTV - 20 - ( )
MTV - 23 - ( )

03.03.2025

e-118.pdf (4.32 MB)

E-124 R75

ATA 61-01-24

Hydraulische Verstellpropeller
Hydraulically Controlled Variable Pitch Propellers (Constant Speed)
MTV - 5 - ( )
MTV - 6 - ( )
MTV - 9 - ( )
MTV - 11 - ( )
MTV - 12 - ( )
MTV - 14 - ( )
MTV - 15 - ( )
MTV - 16 - ( )
MTV - 21 - ( )
MTV - 22 - ( )
MTV - 25 - ( )
MTV - 27 - ( )
MTV - 37 - ( )
MTV - 47 - ( )

19.03.2026

e-124.pdf (5.85 MB)

E-148 R21

ATA 61-01-48

Hydraulische Verstellpropeller
Hydraulically Controlled Variable Pitch Propellers (Constant Speed)
MTV - 2 - ( )
MTV - 3 - ( )

15.05.2024

e-148.pdf (1.05 MB)

E-309 R11

ATA 61-03-09

Mechanische Verstellpropeller
Mechanically Variable Pitch Propeller
MTV - 24 - ( )

09.02.2010

e-309.pdf (0.23 MB)

E-445 R1

Hydraulischer Verstellpropeller
Hydraulically Controlled Variable Pitch Propeller
MTV - 8 - H - F (Strato 2C)

01.02.1995

E-494 R2

Ölzuführung
MTV - 8 - H / 300 - 48 (Airodium)

29.03.2005

E-496

Hydraulischer Verstellpropeller
MTV - 8 - H - C (Airodium)

01.03.1996

E-504 R46

ATA 61-05-04

Reversierbare hydraulische Verstellpropeller
Reversible Hydraulically Controlled Variable Pitch Propellers (Constant Speed)
MTV - 5 - ( ) - R (M)
MTV - 6 - ( ) - R (M)
MTV - 9 - ( ) - R (M)
MTV - 12 - ( ) - R (M)
MTV - 14 - ( ) - R (M)
MTV - 15 - ( ) - R (M)
MTV - 16 - ( ) - R (M)
MTV - 21 - ( ) - R (M)
MTV - 25 - 2-( ) - R (M)
MTV - 27 - ( ) - R (M)
MTV - 37 - ( ) - R (M)
MTV - 47 - ( ) - R (M)

30.10.2025

e-504.pdf (5.33 MB)

E-508 R6

ATA 61-25-08

Hydraulic Propeller Governor (Regler)
P - 480 - ( ) series

12.06.2002

e-508.pdf (1.75 MB)

E-570 R10

ATA 61-05-70

Hydraulically Controlled Variable Pitch Propeller
MTV - 8 - ()

26.02.2019

e-570.pdf (0.61 MB)

E-610 R51

ATA 61-06-10

Reversierbare hydraulische Verstellpropeller
Reversible Hydraulically Controlled Variable Pitch Propellers (Constant Speed)
MTV - 5 - ( ) - R (A), (P)
MTV - 9 - ( ) - R (A), (P), (W)
MTV - 14 - ( ) - R(A)
MTV - 16 - ( ) - R (A), (G), (P), (W)
MTV - 25 - ( ) - R (A)
MTV - 27 - ( ) - R (G), (P), (W), (GE)
MTV - 37 – ( ) - R (P), (G)
MTV - 47 – ( ) - R (P), (G)

23.09.2025

e-610.pdf (5.23 MB)

E-623

ATA 61-06-23

Hydraulically Controlled Variable Pitch Propellers (Constant Speed)
MTV - 27 - 1 - E - C - F
Airfoil-Flairboat

19.02.1999

E-699 R8

ATA 61-26-99

Hydraulic Constant Speed Governors
P - 41( ) - ( )
P - 42( ) - ( )
P - 43( ) - ( )
P - 44( ) - ( )

12.01.2007

e-699.pdf (0.23 MB)

E-779 R2

ATA 61-07-79

Betriebs- und Einbauanweisung
MTE - 843 - D (Schwebegerät)

30.06.2005

e-779.pdf (0.14 MB)

E-1046 R14

ATA 61-20-46

Hydraulic Propeller Governor
P - 9 ( ) ( ) - ( ) series

21.05.2026

e-1046.pdf (1.60 MB)

E-1048 R24

ATA 61-20-48

Hydraulic Constant Speed Governor
P - 8 ( ) ( ) - ( ) series

21.05.2026

e-1048.pdf (3.04 MB)

E-1083 R39

ATA 61-00-83

Reversible Hydraulically controlled variable pitch propeller (for PT6A-67 series)
MTV - 16 - 1 - ( ) - R (P)
MTV - 27 - 1 - ( ) - R (P)
MTV - 27 - 1 - ( ) - R (P) - J
MTV - 27 - 2 - ( ) - R (P)
MTV - 47 - 1 - ( ) - R (P)
MTV - 47 - 1 - ( ) - R (P) - V

15.05.2024

e-1083.pdf (2.12 MB)

E-1298 R26

ATA 61-02-98

Reversible Hydraulically Controlled Variable Pitch Propeller (Hovercraft / Airship)

MTV - 5 - ( ) - R (H)
MTV - 6 - ( ) - R (H)
MTV - 9 - ( ) - R (H)
MTV - 16 - ( ) - R (H)
MTV - 22 - ( ) - R (H)
MTV - 25 - ( ) - R (H)
MTV - 27 - ( ) - R (H)
MTV - 27 - ( ) - R (H) - J

30.10.2025

e-1298.pdf (5.63 MB)

E-1903 R10

ATA 61-09-03

Hydraulically controlled variable Pitch Propeller (constant speed and feathering)
MTV - 4 - 1 - T / 50 - C - F
For Allison V2720-( ) and V-1650-( )

15.05.2024

e-1903.pdf (2.36 MB)

E-1922 R16

ATA 61-09-22

Reversible Hydraulically controlled variable Pitch Propeller
MTV - 27 - 1 - N - C - F - R (G) - J
MTV - 27 - 1 - ( ) - R (P) - J
MTV - 27 - 1 - N - C - F - J

15.05.2024

e-1922.pdf (3.19 MB)

E-1984 R10

ATA 61-09-84

5400- Serien Einstellpropeller mit Metalblättern
5400- series Ground Adjustable Propeller with Metal Blades

08.03.2016

e-1984.pdf (3.84 MB)

E-2197 R1

ATA 61-01-97

Hydraulically controlled Variable Pitch Propeller MTV-28-()
For wind tunnel applications

26.02.2019

e-2197.pdf (0.92 MB)

E-2285 R10

ATA 61-02-85

Ground Adjustable or Hydraulically controlled Variable Pitch Propeller
MTV - 33 - ( )
MTV - 34 - ( )
MTV - 36 - ( )

15.05.2024

e-2285.pdf (1.70 MB)

E-2565 R8

ATA 61-25-65

Electronic Synchrophaser Control Box
( )-213796 MT

15.02.2022

e-2565.pdf (0.93 MB)

E-2872

ATA 61-28-72

Power Pack P-8HO-( )

25.03.2016

e-2872.pdf (0.45 MB)

E-3719 R6

ATA 61-07-19

Reversible Hydraulically Controlled Variable Pitch Propeller MTV-28-2-( )-R(H)

30.10.2025

e-3719.pdf (2.62 MB)

E-3760 R7

ATA 61-07-60

Electric De-Ice Controller

23.09.2025

e-3760.pdf (1.48 MB)

E-3854 R2

ATA 61-08-54

Hydraulic Overspeed Governor P-8S( )-( ) Series

19.03.2026

e-3854.pdf (1.12 MB)

E-3896

ATA 61-08-96

Power Pack P-8HO-2-( )

22.10.2021

e-3896.pdf (0.37 MB)

E-4230 R1

ATA 61-02-30

Reversible Hydraulically Controlled variable Pitch Propeller MTV-9-( )-R(DA)

01.08.2024

e-4230.pdf (3.32 MB)

E-4369

ATA 61-43-69

Beta Valve P-8PPC-1 - only for specific customers -

24.05.2024

E-1057

Governor Installation List

28.05.2026

E-1057 Governor Installation List.pdf (0.47 MB)

1

Installation of Lever Extension on Speed Adjusting Lever

24.10.2007

2A

Installation of Governor Conversion Kit Pitts S2B

11.07.2012

3

Propeller Governor Adjustment Unit T-719a

Replaced by SI-54

23.05.2025

Cessna 182() - E-4355 R2

MTV-9-B/200-52( ) Propeller on Cessna 182S, 182T

14.04.2026

e-4355.pdf (0.11 MB)

Cessna 208 - E-2096 R1

MTV-27-1-E-C-F-R(P)/CFR245-55a ON CESSNA AIRCRAFT COMPANY 208 and 208B

23.06.2026

e-2096.pdf (0.14 MB)

Mooney M20() - E-4158 R2

MTV-12-B/180-59( ) Propeller on M20A, M20B, M20C, M20D

14.04.2026

e-4158.pdf (0.11 MB)

Pilatus PC-12/47E, G - E-3666 E-3660 R4

MTV-47-1-N-C-F-R(P)-V/CFR260-361( ) ON Pilatus PC-12/47E with S/N 1720, 2001 and up with PT6E-67XP engine
AND Pilatus PC-12/47G with S/N 3001 and up with PT6E-67XP engine

13.04.2026

e-3666_e-3660.pdf (0.18 MB)

Vulcanair P.68() - E-1372 R3

MTV-12-B-C-F/CF183-59b ON Vulcanair S.P.A. P.68, P.68B, P.68C, P.68 OBSERVER, P.68 OBSERVER 2
OR
MTV-12-B-C-F/CF183-53 (Optional equipped with Liese muffler 75x8x100) ON Vulcanair S.P.A. P.68, P.68B, P.68C, P.68R, P.68 OBSERVER, P.68 OBSERVER 2

25.04.2025

e-1372.pdf (0.10 MB)

Vulcanair P.68()-() - E-1376 R3

MTV-12-B-C-F/CF188-53 ON VULCANAIR MODELS P.68C-TC, P.68TC Observer

Supersedes E-1442

25.04.2025

e-1376.pdf (0.09 MB)